Having difficulty getting your Pit Boss Grill to reach the right temperature? Is the temperature blinking and won’t stay on one setting? You’re not alone – countless grill owners have experienced this issue when trying to cook on their Pit Boss. Let’s look into the problem of Pit boss temperature blinking thoroughly.
In this article, I will tell you exactly what to do if you find yourself in this situation and provide a few tips for keeping your grill running smoothly in the future. From diagnosing why the temperature is blinking in the first place to troubleshooting solutions, our guide has everything needed to get your grill up and running again in no time!
What Causes the Pit Boss Temperature Blinking?
What the Temperature Blinking Means?
The blinking temperature symbol on your Pit Boss grill indicates that the automatic igniter isn’t working properly and the grill is not hot enough. Why? let me explain, Pit Boss grills are equipped with a relight function that automatically reignites the igniter if the temperature drops below 130°F/55°C. If the igniter is reactivated, the flashing dots on the control board will reappear. A flashing temperature on the control board indicates that the temperature inside the grill is below 150°F/65°C.
This flashing temperature is normal during startup until the grill reaches the desired heat level. However, if the temperature drops dramatically, it could signal a potential risk of fire going out, triggering the flashing temperature.
This can be due to several factors, including failure of the flame rod, thermocouple, or other components. Without a functioning ignition system, your Pit Boss will not maintain a consistent temperature and will be unable to reach and hold your desired cooking setting.
Causes Of Temperature Blinking
There are several common causes for temperature blinking in Pit Boss grills. These may include:
- Dirty flame rod: If debris or residue is on the flame rod, it prevents electricity from properly flowing from the burner control panel to ignite the burner.
- Faulty igniter: A faulty igniter can be caused by worn out parts or corrosion due to moisture build up over time.
- Loose ground wire: The ground wire connects to a metal frame beneath the grill grate and must remain secure for an electrical current to flow through it and ignite the burner.
How To Troubleshoot The Problem?
The first step in troubleshooting temperature blinking is cleaning off any flame rod debris with a soft brush or compressed air. You should also check all wiring connections under your grill’s hood and ensure they are secure and corrosion-free. Finally, assessing any potential issues with components such as thermocouples and spark plugs can help identify what part needs replacing.
Steps to Fix Pit Boss Temperature Blinking
1. Checking for Common Issues
When encountering temperature blinking with your Pit Boss Grill, it’s important to take a few moments to check for potential issues. Begin by cleaning the flame rod, which should be dirt and debris-free. Ensure all wiring connections are secure and corrosion-free, then inspect all components, such as thermocouples, spark plugs, and igniters, for wear or damage.
2. Cleaning The Grill
The next step in troubleshooting is to thoroughly clean your grill’s inside. Remove the grates, burners, heat diffuser plates, and grease tray before wiping down each part with a damp cloth. This will help clear away any residue that can interfere with ignition.
3. Resetting The Grill
If the issue persists after cleaning your grill parts, you may need to reset your grill. To do this, turn off the gas supply valve on the tank before disconnecting from a power source (if applicable). Wait 10 minutes before reconnecting both power sources – if this resolves the issue, your Pit Boss Grill should now be working properly again.
4. Contacting Customer Support
In some cases, none of these steps will rectify the temperature blinking issue on a Pit Boss Grill, so contacting customer support should be your next step. Before doing so, make sure you have the invoice number and details about any past issues or repairs carried out on your grill to get accurate help quickly.
Tips for Preventing Temperature Blinking
- Maintaining The Grill Regularly: One of the best ways to prevent temperature problems with your Pit Boss Grill is to maintain it regularly. Clean all components, including flame rods and spark plugs, with a soft brush or compressed air every so often to ensure they remain free of buildup. Inspect wiring connections and make sure they are free of corrosion.
- Properly Seasoning The Grill: Properly seasoning your Pit Boss Grill before using it for the first time can help reduce issues. Before firing up the grill for the first time, wipe down all surfaces with vegetable oil. After that, ignite the grill and let it burn on a medium-high setting for at least 15 minutes to season the parts and promote a non-stick surface.
- Using Quality Wood Pellets: Quality wood pellets can also go a long way in keeping your Pit Boss running as smoothly as possible. Look for hardwood blends with higher BTUs (British Thermal Units), as these will burn longer and hotter, leading to more consistent cooking temperatures.
If you are having any issue with Pit Boss Fan: Pit Boss Fan Not Working
Frequently Asked Questions (FAQs)
Q: How long does Pit Boss take to heat up?
It typically takes 5-10 minutes to heat up the Pit Boss Grill, depending on the model and selected temperature setting.
Q: Why is my Pit Boss not reaching temp?
A: If your Pit Boss cannot reach the desired temperature, first check for any blockages in the vent system, then inspect all components of the grill, such as wiring connections and spark plugs. You may also need to reset your grill by disconnecting it from both power sources.
Q: What does it mean when the heat symbol is blinking?
When the heat symbol on a Pit Boss Grill blinks, this usually indicates an issue with ignition or airflow. To troubleshoot this issue, start by cleaning all parts of the grill before checking all wiring connections and components for wear or damage.
Q: Pit Boss temp blinking dots, what does it mean?
When you see blinking dots on a Pit Boss Grill, this usually indicates that your set temperature has been exceeded. To fix this and safely use your grill again, lower the temperature until you see a steady flame.
Conclusion:
Maintaining and properly seasoning a Pit Boss Grill can help prevent temperature problems. Blinking heat symbols or dots on your Pit Boss Grill may indicate ignition or airflow problems and should be addressed to ensure the safe operation of the grill.
Additionally, checking for blockages and wear of components such as wiring connections and spark plugs can help keep the grill running smoothly. By following these tips, you should be able to maintain an optimal cooking experience with your Pit Boss Grill.
