It’s crucial to secure your grill for several reasons. It’s better to be safe than to be sorry at a later stage. Your grill may be portable and non-portable too, but it’s essential to keep it protected from some crook simply walking away with it.
Securing your grill will help you with:
- Prevent someone from simply walking away with it.
- Allocate a specific area in your backyard for grilling.
- Avoid rolling over the grill while in use.
- Prevent anyone from stumbling over it.
- Once installed, it may enhance the appreciative value of your home.
How to Secure a Grill to Concrete? (Step By Step Guide)
Let’s understand the steps involved in securing your grill to concrete.
Step 1: Select the Best Grill for You
The first step in fixing your grill to concrete is to select the appropriate grill for your needs. There are various types of grills on the market, so do your homework and choose the one that meets your requirements.
Consider a gas grill if you want it to be simple to clean. Consider a charcoal grill if you want a barbecue that you can use for both cooking and smoking.
Whatever grill you purchase, be sure it is the correct size for your concrete slab. You don’t want a grill that is either too large or small.
Step 2: Scrub the concrete surface clean
Cleaning the concrete surface is the second step in fixing your grill to concrete. This step is critical because you want to ensure that the grill has a solid hold on the surface. Begin by sweeping any dirt or trash from the area using a broom.
Then, power washes the surface with a hose. If there are any stubborn stains, scrape them with a brush and a little detergent. Allow the surface to dry completely before proceeding to the next step.
Step 3: Position the grill as desired
The next step in fixing your barbecue to concrete is to position the grill where you want it. Once you’ve located the ideal location for your barbecue, use a tape measure to determine the center of the space.
Then, using a piece of chalk or a marker mark the midpoint. This point is where you will need to drill the anchor holes Mark.
Step 4: Drilling Holes for the Anchors
Drilling holes for the anchors is the fourth step in fixing your barbecue to concrete. Begin by putting anchors in each corner of the grill.
Then, using a drill, bore holes into the concrete surface. To protect oneself from dust, wear safety glasses and a mask. Once the holes have been bored, suction out any debris using a vacuum.
Step 5: Put the Anchors
Inserting the anchors is the fifth step in fastening your grill to the concrete. Begin by threading the anchor through the grill’s hole. Then, tap it into place with a hammer. Repeat this procedure for each anchor.
Step 6: Mount the grill to the concrete surface.
Attaching the grill to the surface is the sixth and last step in fixing your grill to concrete. Begin by threading the bolts through the anchor holes. Then, using a wrench, tighten them down. Check the bolts regularly to ensure they are still tight.
Pro Hints
Here are some expert techniques and tricks for securing a grill to concrete. By following these instructions, you ensure that your grill is securely fastened to the concrete and will not fall over.
- When working with anchors or bolts, always wear gloves.
- Make the holes without using an impact drill. The vibrations can damage the concrete.
- When drilling the holes, wear safety glasses and a dust mask.
- Check the bolts regularly to ensure they are still tight.
- Check the hose on a gas grill to ensure it is not kinked or damaged.
- If you’re using a charcoal barbecue, appropriately dispose of the ashes.
How do You Secure a Grill from Being Stolen?
It’s such a disappointment once you know your grill is stolen. As stated by the National Barbecue Association, around 81 percent of Americans have purchased grills that are prone to be stolen if left unguarded.
Proper storage and outdoor safety procedures will keep your grill safe all year.
- When not in use, keep the barbecue in a storage shed or garage. Install a padlock or choose a shed with a locking door to prevent a possible burglar from entering effortlessly.
- Take the grill’s wheels off. It makes moving the grill more difficult for a potential thief. When you move the grill for winter storage, reinstall the wheels.
- Use galvanized or SS airplane cable or chain to tie your grill to the deck or patio. Attach the chain/cable to the deck or patio after running the chain around the grill’s legs. Use a padlock to secure the chain/cable.
- Build a fence around your yard or the perimeter of the deck or patio where you keep the grill. Install a gate lock to make it harder for robbers to access at night.
- Place the grill in a prominent location at night. Place the barbecue in your front yard or a well-lit area. Avoid storing your barbecue in an area easily accessible from a back alley or near a road or street.
How to Secure the Grill from the Wind?
To keep your barbecue in place; use cement slabs, cinder blocks, wooden blocks, or big paint cans. The goal is to weigh it down with something substantial to keep it from blowing around in strong winds. You can also use BBQ windscreens to protect your grill from blowing off the flames.
Frequently Asked Questions (FAQs)
Is it safe to grill in high winds?
Dry weather can be extremely dangerous, and a grilling mishap could spark a calamity, therefore use extreme caution when cooking in the wind. In windy conditions, a gas or electric grill is your best bet.
How do you secure a gas grill during a hurricane?
Many grill owners may be anxious about what to do with their barbecues as a storm approaches. If you own a propane barbecue, you can bring it inside during a storm. Because high winds can blow a gas grill into a house window, it is best to store it in a garage or basement.
Before storing the grill, tie it down. If you must leave your propane grill outside, place something heavy on tops of it, such as stones or rocks, to prevent it from being carried away by a strong wind gust.
How do you strap a grill to a deck?
Make use of nylon rope with a minimum breaking strength of 100 pounds. Wrap the rope over the posts or rails of the structural support, then over the legs of the grill and any crossbars. Make a knot out of the loose ends. By using this technique, you can prevent the grill from moving past the three feet of gaps.
Conclusion
Overall, anchoring a store-bought grill grate to concrete is a great idea for several reasons. It gives the family their area for casual chats, lighthearted fun, and simply gathering everyone on a good day.
Securing one to concrete is preferable to any other option, such as barricading it or having to move one out of the garage each time. It’s a simple and enjoyable activity with an unquestionably worthwhile end! I hope now you have a idea about how to secure a grill to concrete, if you have any confusion, please let me know in the comment box.
